This is the second blog in segment routing series. Please check other segment routing blogs here: GNS3 LAB: Segment Routing Configuration on Cisco IOS-XE and IOS-XR routers. GNS3 Cisco Lab : Segment routing Traffic engineering(SRTE) explicit and dynamic path configuration on IOS-XR. In this blog I will discuss about the Segment routing based traffic engineering… Read More GNS3 LAB Cisco : Segment Routing traffic engineering configuration on IOS-XE routers.
Hello folks, In continuation of my previous blog on MPLS TE configuration, I have setup fast-reroute for MPLS TE tunnel so that if a designated primary link fails then the tunnel will take up the alternate path and the traffic loss will be avoided. Please check my previous blog for basic MPLS TE config in… Read More GNS3 Cisco LAB : MPLS TE( Traffic-Engineering) FRR (fast-reroute) Link Protection.
Hello folks, If you have visited my site earlier you might have seen an MPLS post related to the below network. I have been working on this network for around a month now and I plan to keep integrating different technologies in it until it breaks 🙂 (let’s see how much GNS3 on a 16… Read More GNS3 LAB Cisco : Quick Configuration MPLS TE (traffic engineering).