This is a quick nugget kind of blog where we will see the configuration and working of the SRTE WECMP on IOS-XR device. We know how ECMP works basically if we have multiple paths available then we will use those paths to load balance the traffic and this is done in SRTE by default. With… Read More GNS3 Cisco Lab : SRTE(Segment Routing Traffic Engineering) WECMP(weighted ECMP) configuration on Cisco IOS-XR and IOS-XE routers.
This is the second blog in segment routing series. Please check other segment routing blogs here: GNS3 LAB: Segment Routing Configuration on Cisco IOS-XE and IOS-XR routers. GNS3 Cisco Lab : Segment routing Traffic engineering(SRTE) explicit and dynamic path configuration on IOS-XR. In this blog I will discuss about the Segment routing based traffic engineering… Read More GNS3 LAB Cisco : Segment Routing traffic engineering configuration on IOS-XE routers.
This blog is very close to my heart because this is the first one where the lab is done on my recently built remote GNS3 server. Please check my blog on how to configure GNS3 as a remote server here How to Run GNS3 in Client Server Mode Now, lets get started with Segment routing.… Read More GNS3 LAB: Segment Routing Configuration on Cisco IOS-XE and IOS-XR routers.