Introduction: This article is focused on multi-homed EVPN setup that I have prepared in below network topology. One of the biggest advantage with EVPN that we get is multi-homing with it. Earlier with VPLS we did not have multi-homing integrated with the protocol. With multi-homing we can have one CE connected to two PE router… Read More GNS3 Lab Cisco : EVPN Multihome Concept and Configurations
Please Subscribe to my YouTube channel for regular updates. Hi Friends, After putting alot of efforts and trying different devices I was finally able to configure EVPN on GNS3 and so far it is working like a CHARM!! Follow the blog for complete story. EVPN is a service which provides control plane for the protocols… Read More GNS3 LAB Cisco : BGP-EVPN Single Home Configuration
If you have ever tried to setup something similar to production in you network lab then you might have come across this problem that you don’t have enough routes in the routing table. This can be solved easily with traffic generators like Ixia/Spirent/Pagent etc, but you may not be having this in your home lab.We… Read More Script : Python Script to advertise routes by creating Loopback interfaces
This is a quick nugget kind of blog where we will see the configuration and working of the SRTE WECMP on IOS-XR device. We know how ECMP works basically if we have multiple paths available then we will use those paths to load balance the traffic and this is done in SRTE by default. With… Read More GNS3 Cisco Lab : SRTE(Segment Routing Traffic Engineering) WECMP(weighted ECMP) configuration on Cisco IOS-XR and IOS-XE routers.
Have you checked my previous blogs on segment routing ? You can find them here : GNS3 LAB: Segment Routing Configuration on Cisco IOS-XE and IOS-XR routers. GNS3 LAB Cisco : Segment Routing traffic engineering configuration on IOS-XE routers. In this blog, I will discuss about the explicit path SRTE policy. You must remember MPLS… Read More GNS3 Cisco Lab : Segment routing Traffic engineering(SRTE) explicit and dynamic path configuration on IOS-XR.
This is the second blog in segment routing series. Please check other segment routing blogs here: GNS3 LAB: Segment Routing Configuration on Cisco IOS-XE and IOS-XR routers. GNS3 Cisco Lab : Segment routing Traffic engineering(SRTE) explicit and dynamic path configuration on IOS-XR. In this blog I will discuss about the Segment routing based traffic engineering… Read More GNS3 LAB Cisco : Segment Routing traffic engineering configuration on IOS-XE routers.
This blog is very close to my heart because this is the first one where the lab is done on my recently built remote GNS3 server. Please check my blog on how to configure GNS3 as a remote server here How to Run GNS3 in Client Server Mode Now, lets get started with Segment routing.… Read More GNS3 LAB: Segment Routing Configuration on Cisco IOS-XE and IOS-XR routers.
My love hate relationship with GNS3 has come to a next level!! I have a server like configuration on my Ubuntu Machine , it has 64 GB memory so enough for my GNS3 practices.I used to VNC to this machine and run GNS3 on it. This was working just fine but since the day I… Read More How to Run GNS3 in Client Server Mode
We have been using mobile phones for a very long time now. I have been using smartphones for the last 8 years now, but I never cared to venture into the details of that how the phones actually work. Coming from an engineering background I already know some pieces but that knowledge is limited to… Read More How does the LTE 4G mobile Phone work?
Narrow Metric: We all know that by default the metric value for the ISIS route is 10 and it keeps on adding 10 on crossing every single link. For example, if the prefix has reached the router by crossing three links them the metric value associated with the prefix should be 40. See below example… Read More ISIS Metric types. Experimenting with wide and narrow metrics.